Where Is Oil Filter On Lexus Is350 2006

When you make purchases through links on this site, The Rail Ahead may earn an affiliate commission. Also, these posts are based off my ain experiences. I am not responsible for whatever action you take equally a outcome of reading this. Learn More

Oil Alter on a second Gen Lexus IS350

Engine oil does ii things: it helps reduce friction of moving and rubbing internal components by lubrication and it helps absorb heat that is generated from these moving parts. The oil filter takes the oil and filters out its contaminates, then moving the oil on to be used once again.

Co-ordinate to the owner's manual, my 2006 Lexus IS350 with the 2GR-FSE three.0L V6 engine uses a 5W-thirty viscosity oil, merely 10W-30 can exist used as well if the erstwhile is non available. Y'all should supercede your engine oil depending on what type of motor oil you go with.

When changing the oil and oil filter, you will need half-dozen.vi quarts of oil to perform an oil modify. When but irresolute the oil (no filter) and so the transmission says yous'll need only six.2 quarts of oil.

Since the Lexus IS350 sits relatively depression, the motorcar will need to be jacked upward or driven upwards onto ramps in social club to gain admission to the undercarriage. The oil filter is located behind a comprehend under the vehicle. The oil filter likewise utilizes an oil filter housing that will need to be removed with an adapter. When removed, information technology will expose the oil filter which is a cartridge filter type.

Oil Specifications

According to the owner's manual for the 1GRE-FE V6 engine, the following specifications are provided:

Engine Oil Type: 5W-30
Engine Oil Capacity: 5.5 qt with filter, 4.nine qt without filter

Tools/Materials Used

Motor Oil

I've ever used full constructed on my 2nd gen IS350, simply if yous're worried about engine seals leaking from the utilise of total synthetic motor oil, then constructed blend or some type of high mileage oil is a good culling.

SAE 5W-30 Motor Oil on Amazon

Oil Filter

Y'all can't go incorrect with OEM oil filters, and that is what I usually use. The Wix and 1000&N oil filters besides get neat reviews. Here are some office numbers for different oil filters for the 2nd gen IS350 (2006-2013):

OEM (04152-YZZA3): Ebay / Amazon
Wix (57173): Ebay / Amazon
Thousand&N (PS-7023): Ebay / Amazon

Oil Filter Adapter

This adapter is needed to open/close the oil filter housing since the 2nd gen IS350 utilizes a cartridge style oil filter.

Motivx Tools Oil Filter Wrench 64mm Cartridge Style Oil Filter System

Vehicle Ramps or Floor Jack

Vehicle Ramps: RhinoGear Vehicle Ramps – Pair (12,000lb. GVW Capacity)
Floor Jack: Pro-Lift Grey Low Contour Floor Jack – 2 Ton Capacity

Jack Stands

BIG Red Torin Steel Jack Stands: iii Ton (6,000 lb) Chapters, Red, 1 Pair

Cycle Chocks

Camco Bicycle Chocks (Pack of 2)

2nd gen is350 oil change - oil and tools

Oil Change Proecedure: 2d Gen Lexus IS350

Utilize a floor jack or drive upwards on some vehicle ramps to gain access to the bottom of the vehicle. Of form, apply jack stands and a wheel chock for condom.

Open up the oil filler cap.

Underneath the front of the vehicle, you'll see the following cover held in by (3) Phillips head screws. The oil filter is behind this cover.

2nd gen is350 oil change - oil filter cover

The oil filter is a cartridge type, so it has a housing that will demand to be unscrewed in order to supervene upon. The oil filter

Identify an oil drain pan below this area. Once the filter adapter is on, use a wrench to loosen the oil filter housing. Then open the housing past hand and let the oil to baste into the pan. Take some shop towels on manus to clean upward the mess. Remove the quondam cartridge, and so use a apartment caput screwdriver and pry off the old o-ring from the housing cap.

The new oil cartridge filter should come with a new o-ring and a washer. Brand certain to prime the o-ring with new motor oil and install it onto the filter cap.

Re-install the oil filter and tighten the filter cap past manus.

2nd gen is350 oil change - oil filter housing

With a 14mm socket, loosen the oil drain plug. In one case loosened, undo the drain plug by hand. Make sure to hold the drain plug tight plenty at the finish and so you're able to grab it and pull abroad as all the motor oil drains out.

Take the bleed plug bolt, wipe information technology downwards, and install the new primed washer. Then re-install and torque to 18 ft-lbs.

Re-fill the engine with motor oil to around 5 quarts.

I removed the funnel and replaced the cap before starting the vehicle and letting information technology warm up. I then collection the vehicle off the vehicle ramps and so that I can get accurate oil readings on level ground. If you lot were on jack stands, y'all'll demand to become the vehicle down before turning the car on and letting it warm upwards.

Subsequently warming the engine up, close information technology off, and look about 5 minutes, and then checked the oil dipstick. In the instance below, I had a reading right in the middle between low and full.